Single Girder EOT Cranes – Single Girder Overhead Crane
As one of the material handling systems, the EOT crane is a dependable and secure choice for a variety of industrial applications. A wireline, hook, electric motor brake, drum, pulley, and other components are included with this crane. It travels over rails that are connected to Gantry Girders. An EOT crane's main structure is a bridge girder, which is made up of U, I, and other rolled parts. Read more about single girder eot crane.
There are two end carriages to support this bridge girder, and each carriage has two wheels. Below this bridge girder, a wire rope hoist is suspended. The crane can be operated from a pendant station suspended from the rope hoist. This pendant station is not dependent on hoist movement, and it can be customized according to the manufacturer's needs.
The EOT crane is available with Single and Double Girders. Single Girder EOT Cranes are a convenient choice for warehouses and small manufacturing units. You may also use it to treat a hot metal ladle in some situations. A single girder EOT crane's optimal capacity is about 20 MT, and the system can span up to 50 meters. Click here to learn about Types of EOT Cranes.
What is a Single Girder EOT Crane?
Single Girder EOT cranes compact nature and modular construction allow it to lift a large load. Single girder EOT cranes have been built using high-quality wire rope hoists.
Standard features of Single Girder EOT Crane
- Lightweight and lightweight design reduces building loads and saves space.
- Built for light and medium-duty workshop use.
- Both motors are TEFC and have insulation class F.
- Rope guide made of heavy-duty cast-steel
- Limit switches for upper and lower hook movement
- As an alternative, a counterweight can be controlled over the hoist limit switch.
- As an alternative, VVVF drives are available.
The Single Girder EOT Cranes travel along rails installed at the top of the crane runway or Gantry Girders. The crane primarily consists of bridge girders made of rolled parts, including I beams and U beams and fabricated box sections.
Two end carriages, each with a pair of wheels, carry the bridge girder. The motor gearbox units drive the wheels. Below the bridge girder, a wire rope hoist is suspended. The crane can be controlled either by a stationary station suspended from the wire rope hoist or by a radio remote control. According to the customer's preferences, the pendent station may be made to move independently of the hoist movement.
The rope drum on the wire rope hoist is made of seamless tubing. On the rope drum, grooves are machined to provide adequate protection for the wire rope. Wire rope jumps out of tracks because of the cast iron rope band and guide. The hoisting drive system consists of a motor coupled to an oil-lubricated spur / helical gearbox, which drives the rope drum.
In the case of a power outage, an electronic fail-safe brake stops the load from being accidentally lowered. A limit switch is included to prevent the hook block from being hoisted too far. A second limit switch can be added in order to prevent the hook block from being lowered too far.
The hoist's cross movement is accomplished by the movement of wheels assisted on the beam/box flange. An electric motor-gearbox unit provides the drive to the wheels. As an added bonus, a fail-safe brake and a limit switch are issued, as requested by the customer.
The Festoon cable system provides power to the wire rope hoist. Cable hangers or cable trolleys help the versatile cables, which travel on either taught wire or enclosed C track, depending on the customer's preference.
Single girder cranes are primarily used for capacities of up to 20 MT and spans of up to 25 metres. These are mainly used in light and medium workshop duties. However, single-girder cranes are also used to handle hot metal ladles as well as catch buckets.
Benefits of Single Girder EOT Crane
Cost-effective: Single girder EOT cranes are a cost-effective load-lifting device that can be used for various applications. When compared to double girder cranes, they are more lightweight. They only need one bridge girder, which explains the low dead weight. In other words, they can operate their operations on lighter runway systems.
Effectiveness: While EOT cranes have a single girder design; their components have been extensively tested to ensure that they can support you for a more extended period. The motor and gearbox for the smooth hoisting mechanism are highly reliable components. Also, the faultless architecture guarantees high uptime and low maintenance requirements.
Consistent performance: Single girders with torsional rigidity make the most of the available space and height. These cranes are user-friendly, thanks to the use of cutting-edge technology and materials. You can keep using the equipment with limited maintenance.
Extremely customizable: The best single girder EOT crane has a flexible design that allows it to work with your existing structures without requiring significant modifications. Cranes can be customized in a variety of ways to suit your specific needs.
Click here to learn more about single-girder and double-girder cranes.
Single Girder EOT Crane
Single Girder EOT crane installation and maintenance in UAE or overhead cranes are lightweight materials taking care of hardware ordinarily utilized inside the production and engineering facilities. As one of the main makers of single girder EOT cranes, we have some expertise in designing cranes in light of safety and convenience.
Our cranes are offered in standard setups just as specially assembled determinations. The size and load-bearing limit can be adjusted to the particular lifting necessities of our clients.
Single girder cranes offer a superior hook approach for both the trolley and the bridge travel than a double girder crane. The bridge comprises one girder beam supported on each side by an end truck on a single girder crane. The trolley and hoist are most normally underhung, which means they run on the bridge's bottom flange. The bridge itself can either be top running or under running in the plan.
Our determination of bespoke single brace cranes is ideal for lifting prerequisites as light as 250kg or 15T and up to 30 meters in length.
Furthermore, we design and assemble our cranes, considering satisfactory security rules, and our products can be intended to coordinate the prerequisites of both new and existing structures. To find out about our service or to plan a meeting with our experts, contact us today!